Difference between revisions of "Usb memory sticks"

From Linuxintro
imported>ThorstenStaerk
imported>ThorstenStaerk
(Redirected page to Usb storage)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
To find out if a USB stick works, enter
+
#REDIRECT [[usb storage]]
[[dmesg]] | [[tail]] -f
 
and insert the stick. You will find some lines like
 
[44950.907137] usb 2-1.5: new high speed USB device using ehci_hcd and address 4
 
[44950.995677] usb 2-1.5: New USB device found, idVendor=13fe, idProduct=3123
 
[44950.995682] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
 
[44950.995686] usb 2-1.5: Product: STORE N GO
 
[44950.995689] usb 2-1.5: Manufacturer: Verbatim
 
[44950.995691] usb 2-1.5: SerialNumber: 078B06E70173
 
[44950.996463] scsi7 : usb-storage 2-1.5:1.0
 
[44952.030933] scsi 7:0:0:0: Direct-Access    Verbatim STORE N GO      5.00 PQ: 0 ANSI: 0 CCS
 
[44952.031382] sd 7:0:0:0: Attached scsi generic sg8 type 0
 
[44952.465358] sd 7:0:0:0: [sdh] 31735808 512-byte logical blocks: (16.2 GB/15.1 GiB)
 
[44952.466109] sd 7:0:0:0: [sdh] Write Protect is off
 
[44952.466114] sd 7:0:0:0: [sdh] Mode Sense: 23 00 00 00
 
[44952.466118] sd 7:0:0:0: [sdh] Assuming drive cache: write through
 
[44952.470271] sd 7:0:0:0: [sdh] Assuming drive cache: write through
 
'''''[44952.470276]  sdh: sdh1'''''
 
[44952.502054] sd 7:0:0:0: [sdh] Assuming drive cache: write through
 
[44952.502060] sd 7:0:0:0: [sdh] Attached SCSI removable disk
 
The bold line tells you the stick has been attached as [[device]] /dev/sdh.
 

Latest revision as of 12:54, 8 January 2012

Redirect to: