Difference between revisions of "Snmp"

From Linuxintro
imported>ThorstenStaerk
imported>ThorstenStaerk
Line 25: Line 25:
 
  #!/bin/bash
 
  #!/bin/bash
 
  date >>/tmp/dates
 
  date >>/tmp/dates
 +
 +
= 2014-05-06 =
 +
Ok, the following command
 +
snmptrap -v 2c -c public hostname "" NET-SNMP-EXAMPLES-MIB::netSnmpExampleHeartbeatNotification netSnmpExampleHeartbeatRate i 42
 +
works and I can see on hostname
 +
 +
hostname:~ # tcpdump port 162
 +
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
 +
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
 +
12:09:02.418760 IP source.domain.45398 > hostname.domain.snmptrap:  V2Trap(77)  system.sysUpTime.0=60543145 S:1.1.4.1.0=[|snmp]
 +
 +
But I cannot receive it with [[netcAt]].
  
 
= See also =
 
= See also =

Revision as of 10:12, 6 May 2014

Trying to build an SNMP prototype

SUSE Linux:

yast -i nagios apache2
/etc/init.d/nagios start
/etc/init.d/apache2 start

Remember your login nagiosadmin:nagiosadmin and point your browser to http://127.0.0.1/nagios

/etc/init.d/snmptrapd
tail -f /var/log/net-snmpd.log
snmptrap -v 2c -c public localhost "" NET-SNMP-EXAMPLES-MIB::netSnmpExampleHeartbeatNotification netSnmpExampleHeartbeatRate i 42
No access configuration - dropping trap.

So it seems I have to

cat /etc/snmp/snmptrapd.conf
disableAuthorization yes
traphandle default /bin/snmppl
/etc/init.d/snmptrapd restart
cat /bin/snmppl
#!/bin/bash
date >>/tmp/dates

2014-05-06

Ok, the following command

snmptrap -v 2c -c public hostname "" NET-SNMP-EXAMPLES-MIB::netSnmpExampleHeartbeatNotification netSnmpExampleHeartbeatRate i 42

works and I can see on hostname

hostname:~ # tcpdump port 162
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
12:09:02.418760 IP source.domain.45398 > hostname.domain.snmptrap:  V2Trap(77)  system.sysUpTime.0=60543145 S:1.1.4.1.0=[|snmp]

But I cannot receive it with netcAt.

See also