Strace: what a process does

From Linuxintro
Revision as of 12:53, 30 March 2020 by imported>ThorstenStaerk (→‎via sockets)


strace is a command that shows a process' calls to the kernel (aka syscalls). This helps you to do excellent troubleshooting and gain good performance tuning insights.

strace cheat sheet

Understand strace's output

Let's start with a real-world example: You want to troubleShoot sound on your computer. You know that speaker-test does some test noise. To find out what exactly happens, issue: <source>

  1. strace -s 99 -ff speaker-test

</source> You will find a lot of lines like

<source> [pid 15287] write(6, "W", 1) = 1 [pid 15287] recvmsg(7, {msg_name(0)=NULL, msg_iov(1)=[{"L\0\0\0\2L\0\0\2+U\0\0\0\0\0\31vqU\0\0\0\0\0\0\0\0001TU \240\326\0\4\252\354TU \240\326\0\4\262%r\0\0\0\0\0\20\0\0r\0\0\0\0\0\2\260\220R\0\0\0\0\0\0\0\0R\0\0\0\0\0\2\260\220", 83}], msg_controllen=24, {cmsg_len=24, cmsg_level=SOL_SOCKET, cmsg_type=SCM_CREDENTIALS{pid=2289, uid=0, gid=0}}, msg_flags=0}, 0) = 83 [pid 15287] write(6, "W", 1) = 1 </source>

Looks complicated, right? But fear not, every line follows the same pattern:

[pid process id] syscall(parameters) = return code

You will only find the first column with the process id if you use the -ff option (follow sub-processes). For the syscall (write or recvmsg in the above example) it is easy to obtain information - just type

man 2 syscall

in the above example

man 2 write 

and

man 2 recvmsg

And you will find abundant information what the syscall does. If you understand 50% you are doing well :) The return code will also be documented in the syscall's man page.

So what happens here? Obviously speaker-test calls the kernel's recvmsg method. The interesting thing we get from man 2 recvmsg is that the first parameter is sockfd, the file descriptor of a socket. So it hands over a socket as a parameter. Let's look at process' file descriptors: <source>

cd /proc/15287/fd
ls -l
total 0
lrwx------ 1 root root 64 Apr  4 22:55 0 -> /dev/pts/4
lrwx------ 1 root root 64 Apr  4 22:55 1 -> /dev/pts/4
lrwx------ 1 root root 64 Apr  4 22:55 2 -> /dev/pts/4
lr-x------ 1 root root 64 Apr  4 22:55 3 -> pipe:[297487]
l-wx------ 1 root root 64 Apr  4 22:55 4 -> pipe:[297487]
lr-x------ 1 root root 64 Apr  4 22:55 5 -> pipe:[297488]
l-wx------ 1 root root 64 Apr  4 22:55 6 -> pipe:[297488] 
lrwx------ 1 root root 64 Apr  4 22:55 7 -> socket:[297495]

</source>

aha! file descriptor 7 is the unix socket 297495. Let's look what this is connected to:

<source>

ss -p | grep 297495
u_str  ESTAB      0      0      /run/user/0/pulse/native 297496                * 297495  users:(("pulseaudio",2289,28))
u_str  ESTAB      0      0                    * 297495                * 297496  users:(("speaker-test",15286,7))

</source>

We see - the socket 297495 is connected to the socket 297496. What is written into 297495 will be readable from 297496 and the other way round. This couple of sockets connects the speaker-test process with the pulseaudio process. 2289 is pulseaudio's process id, and 15286 is the root process id of speaker-test. This system is using pulseaudio for sound which is an important information for troubleshooting sound. In my example I had been messing around with pulseaudio's configuration and I could fix the problem quickly once I understood I was using it.

strace start options

You can start a new process with strace or you can attach strace to an already running process. To start a new process just put strace in front of its command: <source>

strace -s 99 -ff ls

</source> To attach strace to an already running process, in this example firefox, find out the process' id: <source>

ps -A | grep firefox
2728 pts/1    00:00:02 firefox

</source> Then call strace with the id as parameter: <source>

strace -s 99 -ff -p 2728

</source>

limitations

strace will show you all syscalls from a process, and that's it. This also mean that if your process hangs in an endless loop that does not do any syscall, strace will not show anything.

Examples

interprocess communication

Processes will typically communicate:

  • via network
  • via sockets
  • via pipes
  • via shared memory
  • by writing into files

via sockets

For example when using strace to troubleshoot sound you may see that speaker-test receives messages from file descriptor 7: <source>

strace -s 99 -ffp 32681
[pid 32682] recvmsg(7, {msg_name(0)=NULL, msg_iov(1)=[{"L\0\0\0\2L\0\0\0}U\0\0\0\0\0\22\10\277U\0\0\0\0\0\0\0\0001TU b|\0\17(\347TU b|\0\0175\342r\0\0\0\0\0\20\0\0r\0\0\0\0\0\2\260\220R\0\0\0\0\0\0\0\0R\0\0\0\0\0\2\260\220", 83}], msg_controllen=24, {cmsg_len=24, cmsg_level=SOL_SOCKET, cmsg_type=SCM_CREDENTIALS{pid=2289, uid=0, gid=0}}, msg_flags=0}, 0) = 83

</source> Now let's find out what file descriptor 7 of process 32681 is: <source>

ll /proc/32681/fd/7
lrwx------ 1 root root 64 Apr  4 18:17 /proc/32681/fd/7 -> socket:[198064]

</source> So it is unix socket 198064. Let's find out what process it is: <source>

# ss -p | grep 198064
u_str  ESTAB      0      0                    * 198064                * 198065  users:(("speaker-test",32681,7))
u_str  ESTAB      0      0      /run/user/0/pulse/native 198065                * 198064  users:(("pulseaudio",2289,28))

</source>

via pipes

Let's construct a situation where processes communicate via pipes. The following command will create two processes, cat writing random data to a pipe and grep reading it:

# cat /dev/urandom | grep "To be or not to be, that is the question"

Let's find the process IDs:

# ps -A | grep -E "cat|grep"
 8654 pts/1    00:10:30 cat
 8655 pts/1    00:00:04 grep
10949 pts/2    00:00:00 grep

Let's look at cat's file descriptors:

# cd /proc/8654/fd
# ll
total 0
lrwx------ 1 root root 64 Apr  6 11:40 0 -> /dev/pts/1
l-wx------ 1 root root 64 Apr  6 11:40 1 -> pipe:[70679]
lrwx------ 1 root root 64 Apr  6 11:39 2 -> /dev/pts/1
lr-x------ 1 root root 64 Apr  6 11:40 3 -> /dev/urandom

So cat is communicating with a pipe numbered 70679. Let's see if we can find the other process that is reading from it:

# lsof | grep 70679
cat        8654            root    1w     FIFO        0,8      0t0      70679 pipe
grep       8655            root    0r     FIFO        0,8      0t0      70679 pipe

Works. We can use the command lsof to find the processes involved into pipe communication.

Search for a syscall

With strace, you can search for a special syscall. For example,

strace -e open command

will show you all files that have been touched (opened) by command. This can be used e.g. to find out where configuration changes are stored.

Performance analysis

With strace, you can find out the biggest time-consuming syscalls during a program run:

strace -c ls -R
Entries  Repository  Root
% time     seconds  usecs/call     calls    errors syscall
------ ----------- ----------- --------- --------- ----------------
 67.09    0.412153          14     29664           getdents64
 27.70    0.170168          11     14849        14 open
  4.24    0.026043           0    123740           write
  0.72    0.004443           0     14837           close
  0.20    0.001204           0     14836           fstat
  0.05    0.000285         285         1           execve
  0.00    0.000000           0        12           read
  0.00    0.000000           0         4         3 stat
  0.00    0.000000           0        33           mmap
  0.00    0.000000           0        18           mprotect
  0.00    0.000000           0         4           munmap
  0.00    0.000000           0        12           brk
  0.00    0.000000           0         2           rt_sigaction
  0.00    0.000000           0         1           rt_sigprocmask
  0.00    0.000000           0         2           ioctl
  0.00    0.000000           0         1         1 access
  0.00    0.000000           0         3           mremap
  0.00    0.000000           0         1           fcntl
  0.00    0.000000           0         1           getrlimit
  0.00    0.000000           0         1           statfs
  0.00    0.000000           0         1           arch_prctl
  0.00    0.000000           0         3         1 futex
  0.00    0.000000           0         1           set_tid_address
  0.00    0.000000           0         8           fadvise64
  0.00    0.000000           0         1           set_robust_list
------ ----------- ----------- --------- --------- ----------------
100.00    0.614296                198036        19 total

Now you go

man 2 getdents64

to find out what that syscall is about.

See also