Mdadm

From Linuxintro
Revision as of 13:01, 27 June 2013 by imported>ThorstenStaerk (→‎Create)

mdadm is a tool to create and manage software RAID. It allows you to

  • create a (new) software raid array. Think of two USB hard drives that you just bought and that you want to use in a RAID 1 configuration.
  • assemble an (existing) array. Think of two USB hard drives that you have in your shelve and that you have already made to a RAID array using the create command. When you re-attach them to your computer, you need to tell the computer how the disks belong together (RAID 0 or RAID 1 for example). That is what the assemble command is for.

Create

mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdh /dev/sdi

Assemble

# mdadm --assemble --scan
mdadm: /dev/md/0 has been started with 2 drives.

Store configuration

You can store your mdadm configuration like this:

mdadm --detail --scan >/etc/mdadm.conf 

Monitor

Monitor your raid's status with the command

cat /proc/mdstat

See also


This article is a stub and needs improvement. You can help here :)