Difference between revisions of "Mdadm"

From Linuxintro
(store your mdadm configuration)
imported>ThorstenStaerk
m (Reverted edits by 163.244.62.212 (talk) to last revision by 216.136.110.2)
Line 5: Line 5:
 
= Create =
 
= Create =
 
  mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdh /dev/sdi
 
  mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdh /dev/sdi
 
= Store configuration =
 
You can store your mdadm configuration like this:
 
mdadm --detail --scan >/etc/mdadm.conf
 
  
 
= See also =
 
= See also =

Revision as of 23:18, 23 May 2011

mdadm is a tool to create and manage software RAID. It allows you to

  • create a (new) software raid array. Think of two USB hard drives that you just bought and that you want to use in a RAID 1 configuration.
  • assemble an (existing) array. Think of two USB hard drives that you have in your shelve and that you have already made to a RAID array using the create command. When you re-attach them to your computer, you need to tell the computer how the disks belong together (RAID 0 or RAID 1 for example). That is what the assemble command is for.

Create

mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdh /dev/sdi

See also


This article is a stub and needs improvement. You can help here :)