Difference between revisions of "Mdadm"
From Linuxintro
(store your mdadm configuration) |
|||
| Line 5: | Line 5: | ||
= Create = | = Create = | ||
mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdh /dev/sdi | mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdh /dev/sdi | ||
| + | |||
| + | = Store configuration = | ||
| + | You can store your mdadm configuration like this: | ||
| + | mdadm --detail --scan >/etc/mdadm.conf | ||
= See also = | = See also = | ||
Revision as of 22:58, 23 May 2011
mdadm is a tool to create and manage software RAID. It allows you to
- create a (new) software raid array. Think of two USB hard drives that you just bought and that you want to use in a RAID 1 configuration.
- assemble an (existing) array. Think of two USB hard drives that you have in your shelve and that you have already made to a RAID array using the create command. When you re-attach them to your computer, you need to tell the computer how the disks belong together (RAID 0 or RAID 1 for example). That is what the assemble command is for.
Create
mdadm --create --verbose /dev/md0 --level=0 --raid-devices=2 /dev/sdh /dev/sdi
Store configuration
You can store your mdadm configuration like this:
mdadm --detail --scan >/etc/mdadm.conf
See also
This article is a stub and needs improvement. You can help here :)
