Set up a router to access the internet

From Linuxintro
Revision as of 10:29, 27 July 2012 by imported>ThorstenStaerk
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Linksys Wireless-N Gateway

This chapter describes how to set up a DSL connection on the example of a Linksys Wireless-N Gateway and SUSE Linux 11.1 and Deutsche Telekom as ISP. However, the procedure should be same or similar for all DSL modems and distributions. The Linksys Wireless-N Gateway is a WLAN router with integrated DSL modem, so this article refers to it as "your DSL modem".

  • Connect your DSL splitter to your phone box
  • Connect your DSL modem to your DSL splitter
  • Check that the "DSL" connection light is illuminated
  • Connect your computer via wired network to the DSL modem
  • Assign your computer the IP 192.168.1.2:
ifconfig eth0 192.168.1.2
  • Use firefox to surf to your DSL modem, IP is 192.168.1.1
  • Enter administrator name and password, see the Linksys description if you do not know it
  • Enter your DSL provider's name (e.g. Deutsche Telekom) and your account data in the Linksys' web interface
  • Check that the "Internet" connection light gets illuminated
  • Check your internet connection by pinging a name server:
ping 8.8.8.8

FritzBox

See FritzBox

See also